Hot-dip galvanized steel structure

How to galvanized steel structure?
The articles to be galvanized shall be cleaned and fluxed to a condition that will allow the galvanizing reaction to take place. The molten metal in the working area of the galvanizing bath shall contain not less than 98% by mass of zinc. The bath may contain certain deliberately added elements to achieve special properties. The process of Hot Dip Galvanize was:
The galvanized coating shall be continuous and as smooth and evenly distributed as possible and shall be free of defects that may affect the stated use of the article. The coating shall be free from blisters, i.e. raised areas separated from the solid metal, roughness, sharp points, and flux residues. Lumps and zinc ash are not permitted where they may affect the intended end use of the galvanized product. Any wet storage staining which is formed at the galvanizer’s plant shall be removed prior to the material leaving the plant unless prior arrangements have been made. The underlying coating thickness after this removal treatment shall exceed the specified minimum value.
The coating shall be sufficiently adherent to withstand normal handling without peeling or flaking.
The requirement for coating thickness and mass for articles that are not centrifuged as following:
Article thickness(mm)Local coating thickness minimum(μm)Average coating thickness minimum(μm)Average coating mass minimum(g/m2)
≤1.53545320
>1.5,≤34555390
>3,≤65570500
>67080600
<82535250
≥84055390

from:http://en.qdyili.com/Hot-dip-galvanized-steel-structure.html

留言

發佈留言

此網誌的熱門文章

Anti-corrosion and surface treatment of steel structure building

The  steel structure  has become the best building material at present, and  steel structure buildings  can be seen in many places. However, the surface of the steel structure must be protected against corrosion and surface treatment to ensure the quality and safety of the surface of the steel structure. Let's take a look at the anti-corrosion methods and surface treatment of  steel structure manufacturers . Steel structure corrosion protection method 1. Metal protective layer: The metal protective layer is a metal or alloy with cathode or anode protection. The metal protective layer is formed on the surface of the metal to be protected by electroplating, spray plating, chemical plating, hot plating and infiltration plating ( Membrane) to isolate the contact between the metal and the corrosive medium, or use electrochemical protection to protect the metal, thereby preventing corrosion. 2. Chemical protective layer: chemical or electrochemical methods are ...
閱讀更多

Color steel plate and gutter installation of steel structure

In the construction of  steel structures , installation is also an important link. If you want to install well, you must pay attention to the method. Let's take a look together below. 1. After the  roof purlins  and wall beams are installed, the roof and wall  color steel plates  can be installed. Generally, the wall color steel plate is installed first, and then the roof color steel plate is installed to facilitate the connection of the cornice. The color steel plate is installed with a hidden connection and a self-tapping screw connection. The concealed connection fixes the color steel plate on the purlin through the bracket, and uses a biting machine to snap the adjacent color steel plates between the color steel plates in the transverse direction, or glues them with waterproof adhesive (this method is only applicable to the roof). The self-tapping screw connection is to directly fix the color steel plate on the roof purlin or wall beam by self-tapping screws...
閱讀更多

Design Status and Optimization Countermeasures of Steel Structure Workshop

With the rapid development of the global economy,  steel structures  have played a pivotal role in the field of construction, playing an increasingly important role. Whether in industrial or civil buildings, steel structures are rapidly occupying more and more with their outstanding characteristics Wide market. Its characteristics are: its overall rigidity and seismic performance are good, the construction speed is fast, the self-weight is low, and the bearing capacity is high. It replaces the reinforced concrete structure in large-span and super high-rise buildings, but it also has the disadvantages of poor fire performance and easy corrosion. In order to better play the role of the steel structure in the design according to its characteristics, it is better to play the role of the steel structure, and now the steel structure plant design status and optimization countermeasures are analyzed. A. Overview of steel structure industrial plants 1 Advantages of  steel str...
閱讀更多