Common problems of steel structure bolts

  1. How to connect the steel structure?
The common connection methods of steel structure are welding, riveting, bolt connection (common bolt connection, and high strength bolt connection).
  1. The main classification of bolts.
According to the performance level, bolts are divided into 3.6, 4.8, 5.6, 6.8, 8.8, 9.8, 10.9, and other grades. The bolts of grade 8.8 and above are made of low-carbon alloy steel or medium-carbon steel with heat-treated (quenched and tempered), which are commonly known as high strength bolts. For those bolts bellow grade, 8.8 are generally called common bolts. The numbers before and after the decimal point are respectively expressed as the nominal tensile strength and yield ratio of bolt material.
  • common bolts
Common bolts are commonly used hexagonal bolts, stud bolts, anchor bolts, etc., high-strength bolts are divided into torsion shear-type high-strength bolts and large hexagonal high-strength bolts.
According to the force transmission method, bolts are also divided into shearing bolts, tensile bolts, both shearing and tension bolts.
  1. a. Anti-shear connection. Relying on screw pressure and anti-shear to transmit external force which is perpendicular to rod axis direction, there is a tendency of alternating motion for plates.
  2. b. Tensile connection. Relying on the tensile strength of screw to transmit external force which is parallel to rod axis direction, the plates have a tendency to separate from each other.
  3. c. The connection of tensile and shear joint action. Relying on the screw to transmit both the external force which is perpendicular to the rod axis and the external force that parallel to the rod axis. There is relative displacement and disengagement force between the plates.
  • high-strength bolts
According to calculation and design methods, connection methods of high-strength bolts can be divided into friction-type connection and pressure-type connection.
  1. a. Friction connection. The shearing force is transmitted through frictional resistance which is generated by squeezing. According to the design principle, the shearing force couldn’t exceed frictional resistance.
  2. b. Pressure-bearing connection. The contact surface is allowed to slip. Take the ultimate bearing capacity that connection could reach as a design criterion. Its bearing capacity is higher than the friction type with a compact connection, but the shear deformation is greater than friction type.
  1. Bolt arrangement and bolt spacing requirements.
Bolt arrangement concludes paralleled arrangement and staggered arrangement. The paralleled arrangement is simple, neat and compact with the use of connecting plate in small size, but the component cross-section is largely weakened. The staggered arrangement is not compact with the use of connecting plate in large size, and the component cross-section is slightly weakened.


from:http://en.qdyili.com/common-problems-of-steel-structure-bolts/

留言

發佈留言

此網誌的熱門文章

Anti-corrosion and surface treatment of steel structure building

The  steel structure  has become the best building material at present, and  steel structure buildings  can be seen in many places. However, the surface of the steel structure must be protected against corrosion and surface treatment to ensure the quality and safety of the surface of the steel structure. Let's take a look at the anti-corrosion methods and surface treatment of  steel structure manufacturers . Steel structure corrosion protection method 1. Metal protective layer: The metal protective layer is a metal or alloy with cathode or anode protection. The metal protective layer is formed on the surface of the metal to be protected by electroplating, spray plating, chemical plating, hot plating and infiltration plating ( Membrane) to isolate the contact between the metal and the corrosive medium, or use electrochemical protection to protect the metal, thereby preventing corrosion. 2. Chemical protective layer: chemical or electrochemical methods are ...
閱讀更多

Color steel plate and gutter installation of steel structure

In the construction of  steel structures , installation is also an important link. If you want to install well, you must pay attention to the method. Let's take a look together below. 1. After the  roof purlins  and wall beams are installed, the roof and wall  color steel plates  can be installed. Generally, the wall color steel plate is installed first, and then the roof color steel plate is installed to facilitate the connection of the cornice. The color steel plate is installed with a hidden connection and a self-tapping screw connection. The concealed connection fixes the color steel plate on the purlin through the bracket, and uses a biting machine to snap the adjacent color steel plates between the color steel plates in the transverse direction, or glues them with waterproof adhesive (this method is only applicable to the roof). The self-tapping screw connection is to directly fix the color steel plate on the roof purlin or wall beam by self-tapping screws...
閱讀更多

Design Status and Optimization Countermeasures of Steel Structure Workshop

With the rapid development of the global economy,  steel structures  have played a pivotal role in the field of construction, playing an increasingly important role. Whether in industrial or civil buildings, steel structures are rapidly occupying more and more with their outstanding characteristics Wide market. Its characteristics are: its overall rigidity and seismic performance are good, the construction speed is fast, the self-weight is low, and the bearing capacity is high. It replaces the reinforced concrete structure in large-span and super high-rise buildings, but it also has the disadvantages of poor fire performance and easy corrosion. In order to better play the role of the steel structure in the design according to its characteristics, it is better to play the role of the steel structure, and now the steel structure plant design status and optimization countermeasures are analyzed. A. Overview of steel structure industrial plants 1 Advantages of  steel str...
閱讀更多